Industrial microwave components tuning device
Industrial microwave tuning devices are waveguide components used for matching load impedance and source impedance. They minimize reflected power and provide the most efficient power coupling to the load. Dolph Microwave supplies manual 3 and 4 stub tuners, as well as motorized and automatic tuners. Microwave tuners are simple to use with manual tuning and locking mechanisms. They are typically used in applications where the load impedance varies significantly due to load changes. Industrial microwave components operate at 915 and 2450MHz.
Industrial microwave component magnetron WG launcher
Industrial microwave component mode converter/antenna
Dolph Microwave produces industrial microwave mode converter/antennas for high-end and simple microwave plasma applications. Industrial microwave mode converter/antennas support 915/2450MHz for microwave plasma applications.
Industrial microwave components water loads
Dolph Microwave manufactures a range of industrial microwave water loads. Dual ridge waveguide terminations are also available. Industrial microwave components operate at 915 and 2450MHz.
Industrial microwave component isolator
Dolph Microwave offers standard products for 915 and 2450MHz industrial microwave isolators. These industrial microwave components cover a wide frequency band with a complete range of types available.
Industrial microwave components bend
Dolph Microwave provides industrial microwave bends for 915 and 2450MHz, including E-bends and H-bends. All microwave bends are precisely bent to the required angle while maintaining a constant cross-sectional area to minimize energy reflection.
In addition, this series of industrial microwave bends also has low loss and low VSWR down to 1.06:1, and two configurations of E-bends and H-bends are available.
Industrial microwave component transition
Dolph Microwave offers industrial microwave transition from dual ridge waveguide to rectangular waveguide with standing wave ≤1.15. The transition length, flange, material, surface treatment and electrical specifications for dual ridge waveguide to rectangular waveguide can be customized according to user requirements. Industrial microwave components operate at 915 and 2450MHz.
Industrial microwave component coupler
Dolph Microwave manufactures industrial microwave couplers that cover a wide range of frequencies. Industrial microwave components operate at 915 and 2450MHz. There are multiple types and configurations of flanges and coaxial connectors to choose from. It is ideal for RF microwave applications that require high power detection. It has the characteristics of small size, low VSWR, low frequency response and large waveguide bandwidth. The coupling level can be customized, ranging from 30 dB to 70 dB. The directivity is above 20 dB.
Industrial microwave components sliding short
Dolph Microwave produces industrial microwave sliding shorts at 915 and 2450 MHz. We also offer other special configurations to meet specific customer requirements.